Anicorn Series K452 Space Automatic Watch | Solar

By Anicorn


The Series K452's disc system contains a 3-layer surface from inner to outer discs, graduated for seconds, minutes, and hours respectively.

As shown below, a reference point is engraved from the top of the watchface to its center so you can read time perpendicularly. The seconds are marked out in the center disc. The minute and hour discs are read through an aperture with a single engraved line at the top of the watch.

Every Series K452 will come packaged with a K452 astronaut badge, a laser-engraved metallic card that serves as a document for warranty. The plate is uniquely numbered and issued.

Whether a watch, strap, or bracelet, every item is subject to a final quality check at Anicorn's Hong Kong studio before being hand packaged with care in their premium packaging.


  • Movement: Miyota 9015 automatic movement
  • Vibration frequency: 28800 per hour, 24 Jewels automatic movement
  • Accuracy: -10~+30 seconds/day*
  • Posture difference: Under 40 seconds/day
  • Running Time: More than 42 hours (after full wind)
  • Function: Hours, minutes, seconds
  • Housing: 316L Stainless steel, Ř1.62 in (42mm), height 0.5in (12.5mm), back & screws
  • Glass: Convex hard Plexiglass + Sapphire Coating + Anti-reflection Coating
  • Water-Resistance: 50 meters (5ATM)
  • Strap: Milanese bracelet with safety buckle + Smart docking


  • The Automatic winding watch can also be hand winded by turning the crown in “A” position. Wind 15-20 times. It will start to move naturally after shaking slightly. To set the time, rotate the crown in “C” position and set the standard time.
  • Accuracy: -20~+40 seconds/day